OKFLIP AQUAPURE IONIZER 5 PLATE  :

HOW TO USE – OKFLIP AquaPure Water Ionizer

Simple Operation | Convenient Everyday Use

1. Check Water Supply: Connect the ionizer to a compatible water supply and ensure the inlet water meets the manufacturer's requirements.

2. Power On: Switch on the appliance and wait for the control panel to become ready.

3. Select Water Mode: Use the touch controls to select the desired water setting: pH 7.5, 8.5, 9.5, 10.5, or an available acidic/beauty water mode.

4. Start Water Flow: Operate the unit according to the user manual and allow water to flow at the recommended rate.

5. Collect Water: Collect the selected output in a clean container suitable for its intended use.

6. After Use: Turn off the water supply or appliance as directed in the manual. Allow the automatic cleaning function to operate when required.

7. Regular Maintenance: Follow the recommended cleaning, filter replacement (if applicable), and servicing schedule.

Important Safety & Usage Instructions

Confirm source water quality before installation. This ionizer should not be assumed to disinfect water or remove contaminants unless separately validated for those functions.

Use drinking-water settings only as directed by the manufacturer. Do not assume higher-pH water provides additional health benefits.

Use acidic or beauty water only for applications specified in the official user manual; avoid eye contact and ingestion unless explicitly approved for that use.

Do not open or repair the appliance while it is connected to the power supply.

For installation, troubleshooting and warranty assistance, contact OKFLIP Customer Care: 0141-2944614

Note: Operating steps and available modes may vary by installation. Always follow the supplied product manual and manufacturer instructions.

OKFLIP AQUAPURE IONIZER 5 PLATE  :

Explore the Features of Alkaline Water

OKFLIP AquaPure Water Ionizer

Experience modern water ionization technology with customizable pH settings, designed to offer convenience and flexibility in your daily water routine.

Key Features & Customer Benefits

1. Convenient Daily Hydration
Enjoy easy access to water with multiple selectable pH settings for your everyday hydration preferences.

2. Advanced Water Ionization Technology
Electrolysis technology enables the unit to produce water with different pH characteristics, depending on the selected mode and source water quality.

3. Multiple pH Options
Choose from specified alkaline water settings of pH 7.5, 8.5, 9.5 and 10.5, subject to operating conditions.

4. Distinct Water Characteristics
Explore differences in water pH and oxidation-reduction potential (ORP) produced by the ionization process.

5. Personalised Water Selection
Selectable operating modes offer flexibility to suit different user preferences and manufacturer-approved applications.

6. A Different Taste Experience
Water taste may vary according to mineral content, source water composition and pH, allowing customers to explore their preferred taste.

7. Convenient Everyday Operation
Touch sensor controls, automatic cleaning functions and integrated sensors make operation and routine maintenance more convenient.

Why Choose OKFLIP AquaPure?

5 titanium electrode plates with platinum coating

Multiple selectable water pH settings

Touch sensor control system

Auto Clean and Deep Clean functions

Temperature, flow and TDS sensors

Specified flow rate of 500ml to 1.5 litres per minute

Important Information

Water pH and ORP values depend on source water quality and operating conditions. TDS measurement alone does not establish water safety or contaminant removal. The product should not be considered a water purifier unless its purification performance is independently validated.

Alkaline water has not been conclusively shown to provide additional health benefits over ordinary safe drinking water. This product is a water ionization appliance, not a medical device. No disease prevention, treatment, detoxification or other therapeutic benefit is claimed.

OKFLIP AquaPure — Advanced Water Technology. Designed Around Your Daily Preferences.

OKFLIP AQUAPURE IONIZER 5 PLATE  :

OKFLIP AquaPure Water Ionizer

Materials & Key Components

The OKFLIP AquaPure Water Ionizer is designed with specialized electrode technology, electronic controls and integrated monitoring components for water ionization.

1. Electrode Plates: 5 titanium plates with platinum coating, as specified.

2. Electrode Housing & Internal Structure: Structural materials used to support and secure the electrode assembly.

3. Water Contact Components: Water pathways, connectors and seals made from materials specified for the product's intended operating conditions.

4. Electronic Control System: Circuit boards and control components for operating the ionization process.

5. Touch Sensor / Switch Panel: User interface for selecting operating modes.

6. pH Monitoring & Calibration Components: Components used for pH measurement or calibration, according to the installed configuration.

7. Temperature, Flow & TDS Sensors: Sensors for monitoring selected water and operating parameters.

8. Automatic Cleaning System: Components that support Auto Clean and Deep Clean functions.

9. Power & Safety Components: Electrical supply components and automatic cut-off functionality.

10. Booster Pump Connection: Inbuilt socket for a compatible booster pump.

Product Information

Brand: OKFLIP AQUAPURE

Model: AquaPure Water Ionizer – 5 Plates

Application: Water ionization

Product Dimensions: 255 × 330 × 170 mm

Net Weight: 5.3 kg

Warranty: 3-year plate warranty and 1-year warranty on other parts, subject to official terms.

Note: Water ionization does not, by itself, establish that water is purified or safe from contaminants.