OKFLIP AQUAPURE PURIFIER  :

📋 Quick Start & Operating Guide — OKFlip AquaPure

Phase 1: Installation & First Startup

Secure Placement & Power: Position the unit on a sturdy tabletop, mount it on the wall, or set it up under the counter. Connect the raw water pipeline and plug into a 6 Amp, 220-Volt AC socket.

Automatic Self-Cleaning: Upon powering on, the Auto Flush indicator will blink for 15 seconds to clean the membrane—repeating automatically every hour.

Initial Tank Filling: The Purifying light will blink while filling the tank (takes about 20 minutes) and will stop once full.

First-Time Flush: Before regular consumption, completely drain and flush out the first 2 full storage tanks to clear the system lines.

Phase 2: How to Dispense Water

Normal Water: Touch the Ambient button to instantly dispense room-temperature purified water.

Cold Water: Turn on the Cooling ON/OFF switch. Allow 40 to 50 minutes for the initial chilling cycle (0.8L capacity), then press the Cold Water button.

Hot Water: Switch on the Heater ON/OFF button. Water reaches heating temperature within 3 to 4 minutes (1L capacity). Unlock the Child Safety Lock first, then long-press the Hot Water button to dispense safely.

Phase 3: Using the Fruit & Vegetable Detoxifier

Sanitization Setup: Submerge your fruits and vegetables in a bowl of tap water and place the ozone air pipe (with its ceramic ball diffuser) into the water.

Operation: Press the Detoxifier / Ozone button. Run for 5 to 15 minutes to clean surface impurities; it stops automatically or can be turned off manually.

Phase 4: Maintenance & Care Alerts

Pre-Filter Reminder: The PP Filter light blinks after 400 working hours, indicating it's time to check or replace the pre-filter cartridge.

Service Indicator: When the Service light blinks, contact customer care or a local technician for routine maintenance.

Vacation Mode: If the machine will remain unused for more than 1–2 days, switch off all power buttons.

OKFLIP AQUAPURE PURIFIER  :

OKFLIP AQUAPURE PURIFIER: Key Benefits & Features

3-in-1 Temperature Control: Easily switch between Hot, Cold, and Normal water options directly from the panel to suit your daily beverage and drinking preferences.

Integrated Fruit & Vegetable Detoxifier: Helps clean surface residues and impurities from fresh produce using an easy-to-use ozone function.

Modern Touch Operation: Sleek, compact design equipped with a responsive touch panel for effortless mode selection and status monitoring.

Advanced Water Saving Design: Engineered with Aqua Revive Technology to support efficient water usage when installed following the standard operating steps.

In-Tank Protection: Built-in LED UV technology helps safeguard stored purified water inside the tank against secondary contamination.

Built-in Pre-Filtration: Features an accessible pre-filter stage designed to trap larger particles like dust, sand, and rust before they reach the core purification system.

For More Details See Vedio

https://youtu.be/z5sv-rYEqbA?si=8LTHxeVTsgXMQ-a_

OKFLIP AQUAPURE PURIFIER  :

Technical Specifications Table